#1 05 Paź 2011 13:02 witam, posiadam router TP-Link TL-WR740N z którego chce zrobić access pointa. Inny router D-Link DIR-300 jest głównym podłączonym do sieci, który po Wi-Fi udostępnia mi sygnał internetowy w mieszkaniu. Jak to wszystko skonfigurować, aby ładnie zaświeciło bezprzewodowo? Pozdrawiam. mbo VIP Zasłużony dla elektroda Pomocny post? Connect power and turn on the modem with the black button on the back. Connect an Ethernet LAN cable to one of the yellow rear ports. In the browser's address bar, enter the IP address for the modem interface page: 192.168.1.1. If the modem is fresh from the factory, use the default user name and password to gain access. This article will explain how to use your MERCUSYS router as an access point. The main router will be connected to the MERCUSYS router via LAN port (as seen below). The WAN port is not used for this configuration. Step 1. Connect your computer to a second LAN port on your MERCUSYS router using an Ethernet cable. 300Mbps Wireless N Access Point. TP-Link's Wireless Access Points allow you to add more WiFi devices to your network so you can share music, movies, files, photos, and printers. 2. Go to Basic> OneMesh or Advanced> OneMesh. 3. When an extender joins the OneMesh network, it will be listed in the Devices in. OneMesh Network list. Otherwise, you need to find it in the Available OneMesh. Devices list and click Add to add it to the OneMesh network. Now your router and extenders successfully form one OneMesh network! AC1200 Wireless Access Point. AC1200 Dual-Band Wi-Fi - 867 Mbps at 5 GHz and 300 Mbps at 2.4 GHz band. Flexible Deployment - Supports Passive PoE to carry electrical power and data simultaneously. Multiple Modes - Supports Access Point, Range Extender, Multi-SSID, and Client modes to meet any network needs. MU-MIMO Technology MuX4.

tp link konfiguracja access point